Model 9800 Central Station Receiver Installation/Operation Manual
5-56 151018
To Change the Echo Suppress Setting:
If echo suppression is enabled (Y) a 2025Hz signal will be output for two seconds to disable
echo suppression equipment. This option should be used only for panels that require a 2225Hz
handshake.
1. Follow the procedure in Section 5.5.2.2.
2. Press for Miscellaneous Line Options menu (see Figure 5-15).
The display Flashes on the Echo Supress= field.
3. Press or to change the echo suppress option from Y (Yes) to N (No) or vice
versa.
4. When the setting is flashing press .
How to Set Caller ID
Caller Id information is only sent if the incoming call has no data contained in it.
Note: If the incoming message contains any data (valid or invalid) no Caller ID information will be sent.
1. Follow the procedure in Section 5.5.2.2.
2. Press for Miscellaneous Line Options menu (see Figure 5-15).
The display Flashes on the Echo Supress= field.
3. Press until the display flashes on the Caller ID field.
4. Press or o change the caller ID option from Y (Yes) to N (No) or vice versa.
5. When the setting is flashing press .
To Change the Billing Delay Setting:
If billing delay is enabled (Y), a delay of two seconds will be inserted at the beginning of each
incoming call.
1. Follow the procedure in Section 5.5.2.2.
2. Press for Miscellaneous Line Options menu.
3. Press until the display flashes on the Billing Delay field.
4. Press or to toggle the billing delay between “Yes” or “No”.
5. When the desired setting is flashing press .
Commentaires sur ces manuels