Programming
151018 5-41
Change the Handshake Sequence Number
1. Follow the procedure in Section 5.5.2.2.
2. Press for handshake sequence menu.
When display flashes on the Seq# (see Figure 5-11).
3. Press or to change the ordered handshake number.
1 = the first handshake tone sent 2 = the second handshake tone to be sent and so on.
4. When the desired sequence number is flashing press or
The display will start flashing the format group field.
Change the Format Group
1. Follow the procedure in Section 5.5.2.2.
2. Press for handshake sequence menu.
3. Press until the display flashes on the Format Group field.
4. Press or to change the format group. See Table 6-1 in Section 6 for your com-
munication format.
5. When the desired format group is flashing press or .
Change the Handshake Duration Time
The handshake duration is the length of time that the receiver will send a handshake tone. See
Table 5-12 for valid entries for each line card model.
1. Follow the procedure in Section 5.5.2.2.
2. Press for handshake sequence menu.
3. Press until the display flashes on the Hs duration field.
4. Enter the desired value from the keypad or press or to change the handshake
duration time.
5. When the desired handshake duration time is flashing press or .
Commentaires sur ces manuels