SILENT KNIGHT 4821 Instructions d'exploitation télécharger pdf (Page 36)

When an alarm occurs in a zone programmed for

silent or invisible alarms, audible warnings do not

sound and LCD messages do NOT display, but the

alarm is still reported to the central station.

Silencing Alarms

Refer to page 33 for additional details on what to do when an alarm sounds.

Alarm Speaker Sound Bell Sound

FIRE Rapid high-low siren sound. Each high-low

sound lasts approximately 1/2 second.

1 sec. on, 1 sec. off.

INTRUSION (Burglary) Loud whoop sound; 3 whoops per second. Steady.

EMERGENCY (Non-Medical) Slow, high-low siren sound. Each sound lasts

about 6 seconds.

*None

AUXILIARY Low-high siren sound. *None

* Note: Contact your installing company to program bell sounds.

To silence any alarm: To reset an alarm:

Single-Area Systems

Press

MUTE

+ code.

Enter your code.

Multi-Area Systems

Press

MUTE

+ code.

Enter your code, then press

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 47 48

Pas de commentaire

SILENT KNIGHT 4821 Instructions d'exploitation Page 36