SILENT KNIGHT 5084 Manuel d'installation télécharger pdf (Page 42)

Operation Modes

151174 4-9

8. Enter the time you wish to enable the auxiliary door relay.

9. Press *. The display shows AUX DISABLE TIME

XX:XX.

X = a number from 0-9. Enter time based on a 24 hour clock (military time).

This feature sets the ending time of the auxiliary relay time window.

10. Enter the time you wish to disable the auxiliary door relay.

11. Press *.

4.2.4 Operating Mode 3

Activate Door Relay

Operating Mode 3 activates door relay for the time set in Door Time of the system options

(see 4.2.1 step 22 for step-by-step instructions on how to set Door Time).

To activate door relay use the following procedure:

1. Press * then 3. The display will showACCESS #

2. Enter the 6-digit access code. (Factory default is 123456.)

The display shows DOOR IS OPEN.

The door relay stays active for the “door time”.

4.2.5 Operating Mode 4

Activate Auxiliary Relay

Operating Mode 4 activates the auxiliary relay when Aux Relay is programmed as Enabled

(see also Section 4.2.1 step 28 for Aux relay programming).

To activate the auxiliary relay:

1. Press * then 4. The display will showACCESS #

2. Enter the 6-digit access code. (Factory default is 123456.)

The display shows DOOR IS OPEN.

The auxiliary door remains open for “door time”.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 57 58

Pas de commentaire

SILENT KNIGHT 5084 Manuel d'installation Page 42